Rocket Kits & Combos
Rocket Motors & Propulsion
Rocket Parts & Subcomponents
Launch Equipment
Experimental Rocketry Equipment
Tools & Supplies
Services
Merchandise
Casting Equipment
Vibratory Casting Bed
In Stock
₹10,620.00
Inclusive of all taxes
Vibrates a freshly melt-cast propellant grain to settle the mixture and expel trapped air, producing a denser, homogenised cast.
Tray Size
250×180mm
Load Cap.
Up to 3kg
Settling Time
~25 min
About This Product
After melt-casting propellant into a mold or casing, the mixture can trap air pockets and settle unevenly as it cools. A vibratory casting bed addresses this by vibrating the cast directly after pouring, helping the mixture settle and expelling trapped air — producing a denser, more homogenised propellant grain with fewer internal voids.
How It's Used
- Place the filled mold/casing on the tray immediately after casting.
- Switch on and set the desired vibration speed.
- Run for the recommended settling time.
- Switch off and allow the cast to continue solidifying/curing as normal.
Specification
| Spec | Value |
|---|---|
| Tray Size | 250mm × 180mm |
| Load Capacity | Up to 3kg |
| Motor | AC powered |
| Controls | Single toggle switch (on/off with integrated speed control) |
| Recommended Settling Time | 25 minutes |
⚠️ Handle freshly cast propellant with the same care as during casting itself — avoid running the bed longer than needed, and follow standard safety protocols for handling uncured propellant.